Powerful Layer of Anonymity

[Bossy55]

Many people know about such a distribution Backbox linux. They know about his anonimous mode (change the ip, host name, MAC-addresses, plug webrtc, flash and other stuff we do not need). In short, this is a cool feature, we can say out of the box. But not everyone knows that such feature can be put in any lin.
1. Edit the source.list and add the desired turnip
Code:

fuck@system: nano /etc/apt/sources.list

Adding these turnips
Code:

deb http://deb.torproject.org/torproject.org wheezy main

2. Updating, naturally
Code:

fuck@system: sudo apt-get update

3. The line produces an error, but we can do everything. And on this trying to drive into the terminal the following
Code:

fuck@system: sudo gpg --keyserver keys.gnupg.net --recv 886DDD89

Code:

fuck@system: sudo gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | sudo apt-key add -

*** So we'll add a super secret keys from Snowden
4. Install Tor depending
Code:

fuck@system: sudo apt-get install deb.torproject.org-keyring

Code:

fuck@system: sudo apt-get install tor

5. Now we need to edit the config torovskie
Code:

fuck@system: nano /etc/default/tor

We look for the line RUN_DAEMON = "no" and replace RUN_DAEMON = "yes"
6. Run all the necessary daemons
Code:

fuck@system: sudo service tor start

Code:

fuck@system: sudo service tor stop

Code:

fuck@system: sudo service tor restart

Code:

fuck@system: sudo service tor status

7. Go to the cd and create an empty file
Code:

fuck@system: touch anonimous_mode

where "touch" - is to create a new empty file, "anonimous_mode" - file name. Principle, this script can be created in any convenient location, and under any name. Personally, I have called "mayoru_her"))
8. Open your file for example in nano and paste the following script to
Code:

#

# You should have received a copy of the GNU General Public License

# along with backbox-anonymous. If not, see <http://www.gnu.org/licenses/>.

export BLUE='\033[1;94m'

export GREEN='\033[1;92m'

export RED='\033[1;91m'

export ENDC='\033[1;00m'

# Destinations you don't want routed through Tor

NON_TOR="192.168.0.0/16 172.16.0.0/12 10.0.0.0/8"

# The GID Tor runs as

TOR_GID="debian-tor"

# Tor's TransPort

TRANS_PORT="9040"

case "$1" in

    start)

        # Make sure only root can run this script

        if [ $(id -u) -ne 0 ]; then

          echo "\n$RED[!] This script must be run as root$ENDC\n" >&2

          exit 1

        fi

        # Check torrc config file

        grep -q -x 'VirtualAddrNetwork 10.192.0.0/10' /etc/tor/torrc

        if [ $? -ne 0 ]; then

            echo "\n$RED[!] Please add the following to your /etc/tor/torrc and restart service:$ENDC\n" >&2

            echo "$BLUE#----------------------------------------------------------------------#$ENDC"

            echo "VirtualAddrNetwork 10.192.0.0/10"

            echo "AutomapHostsOnResolve 1"

            echo "TransPort 9040"

            echo "DNSPort 53"

            echo "$BLUE#----------------------------------------------------------------------#$ENDC\n"

            exit 1

        fi

        grep -q -x 'AutomapHostsOnResolve 1' /etc/tor/torrc

        if [ $? -ne 0 ]; then

            echo "\n$RED[!] Please add the following to your /etc/tor/torrc and restart service:$ENDC\n" >&2

            echo "$BLUE#----------------------------------------------------------------------#$ENDC"

            echo "VirtualAddrNetwork 10.192.0.0/10"

            echo "AutomapHostsOnResolve 1"

            echo "TransPort 9040"

            echo "DNSPort 53"

            echo "$BLUE#----------------------------------------------------------------------#$ENDC\n"

            exit 1

        fi

        grep -q -x 'TransPort 9040' /etc/tor/torrc

        if [ $? -ne 0 ]; then

            echo "\n$RED[!] Please add the following to your /etc/tor/torrc and restart service:$ENDC\n" >&2

            echo "$BLUE#----------------------------------------------------------------------#$ENDC"

            echo "VirtualAddrNetwork 10.192.0.0/10"

            echo "AutomapHostsOnResolve 1"

            echo "TransPort 9040"

            echo "DNSPort 53"

            echo "$BLUE#----------------------------------------------------------------------#$ENDC\n"

            exit 1

        fi

        grep -q -x 'DNSPort 53' /etc/tor/torrc

        if [ $? -ne 0 ]; then

            echo "\n$RED[!] Please add the following to your /etc/tor/torrc and restart service:$ENDC\n" >&2

            echo "$BLUE#----------------------------------------------------------------------#$ENDC"

            echo "VirtualAddrNetwork 10.192.0.0/10"

            echo "AutomapHostsOnResolve 1"

            echo "TransPort 9040"

            echo "DNSPort 53"

            echo "$BLUE#----------------------------------------------------------------------#$ENDC\n"

            exit 1

        fi

        echo "\n$BLUE[i] Starting anonymous mode:$ENDC\n"

        if [ ! -e /var/run/tor/tor.pid ]; then

            echo " $RED*$ENDC Tor is not running! Quitting...\n" >&2

            exit 1

        fi

        iptables -F

        iptables -t nat -F

        echo " $GREEN*$ENDC Deleted all iptables rules"

        echo 'nameserver 127.0.0.1' > /etc/resolv.conf

        echo " $GREEN*$ENDC Modified resolv.conf to use Tor"

        iptables -t nat -A OUTPUT -m owner --gid-owner $TOR_GID -j RETURN

        iptables -t nat -A OUTPUT -p udp --dport 53 -j REDIRECT --to-ports 53

        for NET in $NON_TOR 127.0.0.0/9 127.128.0.0/10; do

            iptables -t nat -A OUTPUT -d $NET -j RETURN

        done

        iptables -t nat -A OUTPUT -p tcp --syn -j REDIRECT --to-ports $TRANS_PORT

        iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

        for NET in $NON_TOR 127.0.0.0/8; do

                iptables -A OUTPUT -d $NET -j ACCEPT

        done

        iptables -A OUTPUT -m owner --gid-owner $TOR_GID -j ACCEPT

        iptables -A OUTPUT -j REJECT

        echo "$GREEN *$ENDC Redirected all traffic throught Tor\n"

        echo "$BLUE[i] Are you using Tor?$ENDC\n"

        echo "$GREEN *$ENDC Please refer to https://check.torproject.org\n"

    ;;

    stop)

        # Make sure only root can run our script

        if [ $(id -u) -ne 0 ]; then

          echo "\n$RED[!] This script must be run as root$ENDC\n" >&2

          exit 1

        fi

        echo "\n$BLUE[i] Stopping anonymous mode:$ENDC\n"

        echo 'nameserver 208.67.222.222' >  /etc/resolv.conf

        echo 'nameserver 208.67.220.220' >> /etc/resolv.conf

        echo " $GREEN*$ENDC Modified resolv.conf to use OpenDNS"

        iptables -F

        iptables -t nat -F

        echo " $GREEN*$ENDC Deleted all iptables rules\n"

    ;;

    restart)

        $0 stop

        $0 start

    ;;

    *)

    echo "Usage: $0 {start|stop|restart}"

    exit 1

    ;;

esac

exit 0

9. Daem rights to our script
Code:

fuck@system: sudo chmod 755 anonimous_mode

10. For convenience possible to put the script in the folder / bin directory, to run from the terminal via the tab key (conveniently the same)
Code:

fuck@system: anonimous_mode /usr/bin/anonimous_mode

11. Again torovskie config mode
Code:

fuck@system: nano /etc/tor/torrc

To do this, put the cursor at the beginning. The first line will leave an empty enter button. The second, third, and fifth chetrvertaya line should not be commented out (no # and ##). They inserted the following
Code:

VirtualAddrNetwork 10.192.0.0/10

AutomapHostsOnResolve 1

TransPort 9040

DNSPort 53

Working with the script commands can be
Code:

fuck@system: sudo backbox-anonymous start

Code:

fuck@system: sudo backbox-anonymous stop

Code:

fuck@system: sudo backbox-anonymous restart

All! Come checked for https://www.whoer.net, but at least on https://www.browserleaks.com (look at the results, shit do not advise). Joking aside, but if in fact, this method is a very powerful way to cover your ass. Thanks to all!