EMV software.

[bulat]

Add some knowledge
What is EMV?
https://en.wikipedia.org/wiki/EMV
EMV SDK.
EMV SDK will allow you to Read/Write Credit and Debit Card EMV Chip.
Operating System.
You will need a Laptop/Computer with Windows xp,7,8,8.1 Or Windows 10.
Hardware.
It is compatible with MCR 200,ACR 38,ACR 92,Omnikey (Any Model),LKE 2600 and ZCS 160.
Smart Cards.
It is compatible with Smart Cards Type ISO/IC 7816,JCOP21-36,JCOPS3CC9P9 and JCOP 2A080.
Type Of Card
EMV SDK is able to Read/Write The fallow cards Visa,Visa Electron,MasterCard,Maestro,Amex,Union-Pay,Diners,Dicover and JCP.
In order to start you will need one Hardware,One Smart Card and one Track 2 + PIN.
How to Use it.
1- Start your Laptop/Computer and install JDK http://www.oracle.com/technetwork/ja...ig-417990.html
2-Once is done run EMV SDK as admin in the same folder with the rest of the files,You will see an box asking you for your License key Enter your license key and allow to the software 1/2 Min for the complete installation.
3-Connect your hardware to your laptop From the software Interface Select your hardware and press connect is it is connected then the software will show you a popup with the connected Hardware.
4-From the software interface select your card format and press Check USB Port a popup will show you the connected com port.
5-Select your type of card Visa,MasterCard Etc…
6-Enter the Card Holder Name.
7-Press the Button Generate ARQC Key (this will generate a unique ARQC Key)
8-Press Generate Master Key (This will Generate a Master Key)
9-Check the Box Generate a New ICVV For Each Transaction,Accept EPI MCI Credit Debit,Accept ARPC Key,Store ARPC Key,USE EMV Tag and ICVV.
10-Press the button Check ARQC Key and Check Master Key.
11-Select The Card Expiration Data (The day is not Important Only the Month and Year is Important)
12-Enter The Pin cod of the card (If you are in USA and you want to use the card in POS then the PIN Is not Necessary but if you will like to use the Card in ATM then You need the Pin cod)
13-Enter The Track 1 and Track 2 ATTENTION THE TRACK 2 NEED TO BE WITH D not = Example 1234567891085696D1465446886489484 Not 1234567891085696=1465446886489484,because the software will burn the data over your EMV Chip in .hex format since the POS/ATM is communicating in .hex not txt.
14-Now press Valid data a popup will show up with the data you write in the software interface please check if is correct if it is then press Burn-card Button and allow the software 30/1 Min in order for it to burn the data over the EMV Chip.
15-Press the button EXIT to exit the software,IMPORTANT DON’T PULL OUT THE CARD WHEN THE SOFTWARE IS OPEN EXIT THE SOFTWARE THEN YOU PULL-OUT THE CARD.
16-Read the card a gain and see if all is ok for this simple run the software as admin,inter your card in the Hardware and from the software interface press the button Read Card allow it 15/30 sec and the data will show up if all is ok.
Now you are ready to use the card in any POS/ATM.
Frequently asked questions –
1-Where can i buy The hardware,Smart Card and Dumps?
Hardware
https://www.alibaba.com/product-deta...9bb01e8dig3eyP
Smart Cards
https://www.alibaba.com/product-deta...56c64729P56Ga6
Cards
Is your Problem,i don’t sell and don’t advice any seller,please don’t connect me to buy dumps cvv skimmer,i don’t sell dumps cvv or skimmers.
2-Can i use the Card with a random PIN?
Yes and No,what i mean is that some POS/ATM Work offline and some Online,example if you have a Track 2 and you dont have the pin cod and you will like to use it,then you need to find a POS/ATM that is working offline most of the POS/ATM that work offline are isolate POS/ATM like on Big Sheep booths in this case if you will write on the card with EMV SDK pin 1234 then at the POS/ATM When you will insert the card the POS/ATM Will ask you to enter the PIN and if you enter 1234 then the POS/ATM will valid your transaction because the POS/ATM will check if the pin cod that you enter is matching with the pin cod that is write on the EMV Chip,if you will use the card in a POS/ATM Then you will need to have the original PIN Cod because the POS/ATM Will check it online on the bank server and it will valid the transaction,in USA in order for you to use the Card in POS you don’t need to have the pin cod because it is insert emv and signature but if you will like to use it in ATM then you will need to have the original credit card PIN cod.
3-With the Card write with EMV SDK will i be use to see the card balance?
Yes you will be able to use the card as the original one,you will be able to make shopping,check the balance and cash out from ATM.
4-Why the rest of the software are not working and yours will work?
I saw it in other forums. I don’t know if it’s true or not. Who knows。