Go Back   Carder.life > [en] International Forum > Carding News



Reply
 
Thread Tools Display Modes
  #1  
Old 01-08-2025, 04:01 PM

Мамкин Кардер Элитный Мамкин Кардер Элитный is offline
Join Date: Nov 2024
Posts: 0
Default


for this cvv punch method
which is best?
1. Destroy Magstrip so it READS NOTHING & You Tell Clerk To Manually Enter
2. Make Magstrip Give Read Error Then POS or CLERK Prompts the manual Entry
  #2  
Old 01-08-2025, 04:33 PM

proffi proffi is offline
Member
Join Date: Sep 2023
Posts: 54
Default


Best option.....
Don't write anything in Magstripe................. when cashier try to swipe .....reading error / any other error.
if he tries 2nd and 3rd time....it should show ...enter card details ....bla black bla....
its like a fault from his own POS not from your card or whatever.....
Goodluck!









  #3  
Old 01-08-2025, 04:49 PM

Мамкин Кардер Элитный Мамкин Кардер Элитный is offline
Join Date: Nov 2024
Posts: 0
Default


Quote:
Originally Posted by stolichnaya
Best option.....
Don't write anything in Magstripe................. when cashier try to swipe .....reading error / any other error.
if he tries 2nd and 3rd time....it should show ...enter card details ....bla black bla....
its like a fault from his own POS not from your card or whatever.....
Goodluck!







so basically leave magstrip blank? because when i do that with my own msr it shows or does nothing so hypothetically it wont show error cause it does nothing...will pos do the same?
  #4  
Old 01-08-2025, 04:57 PM

ГУСЬ. ГУСЬ. is offline
Join Date: Dec 2023
Posts: 0
Default


on your msr when your reading, click on the raw data button... it will pull up a read error code on the track 2
  #5  
Old 01-08-2025, 05:08 PM

Corrupt3d Corrupt3d is offline
Join Date: Mar 2024
Posts: 0
Default


thats shit dont work no more rarely will you find a place that dose it and
you better be careful cause you will need the CVV on the back most of the time
the cashiers love to say we cannot manually type it in when they can !!!
so good luck but it dont work for me !!!
  #6  
Old 01-08-2025, 05:17 PM

Мамкин Кардер Элитный Мамкин Кардер Элитный is offline
Join Date: Nov 2024
Posts: 0
Default


Quote:
Originally Posted by gwilliamson1
thats shit dont work no more rarely will you find a place that dose it and
you better be careful cause you will need the CVV on the back most of the time
the cashiers love to say we cannot manually type it in when they can !!!
so good luck but it dont work for me !!!
u mean punching as a whole rarely works anymore?
  #7  
Old 01-08-2025, 05:22 PM

proffi proffi is offline
Member
Join Date: Sep 2023
Posts: 54
Default


In this case ... mag is blank ... pos can't read anything
Next line of action
Punch .
  #8  
Old 01-08-2025, 05:28 PM

TuriGilyano TuriGilyano is offline
Join Date: Nov 2023
Posts: 0
Default


Sometimes they will still punch but in my opinion not for much, you have to remember this is something that that is going on for over 20 years way before you could even buy a dump.
  #9  
Old 01-08-2025, 05:31 PM

danp danp is offline
Join Date: Sep 2021
Posts: 0
Default


The manual method or punche is very very dangerous nowadays 80% of stores are asking for verifications by phone and asking the actual data of the ccv to be careful with that
thanks and good luck..
  #10  
Old 01-08-2025, 05:35 PM

Blackwood Blackwood is offline
Banned
Join Date: Apr 2022
Posts: 0
Default


You gotta print youre own cards so that everything matches including cvv. You can make the card look very old and damage the magstrip a bit, for example put a small scrath or a hole in it and say that you didnt have time to replace it and sometimes it works and sometimes it doesnt. Worst case scenario if all the info matches they will refuse you the purchase. But still, this method is very outdated and works on a human error factor so i suggest you get good 101 instead
Reply

Tags
NULL


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump




All times are GMT. The time now is 10:28 AM.