Amount
000000000000
Amount Other
000000000000
Country Code
0000
TVR
0000000000
Currency Code
0000
Transaction Date
000000
Transaction Type
00
Unpredict Number
00000000
AIP
0000
ATC
0000
IAD
06010A03A00000
RC
00
MDKAC
____ ____ ____ ____ ____ ____ ____ ____
ARQC
ARPC

Запишу трек на jcop карточку и буду юзать ее

can anyone shear x2 software?

x2 no good

x2 is fake and not working software stupid

With OSMOCOM SIM TRACE you can intercept APDU data between POS and card during transaction
to get all what you need.
If data are SDA is mean that is static so dont change, a lot of card are SDA
But think a second if a DDA card is used in SDA terminal only what happened????
DDA work as SDA because of pos reader........
Why it cannot work from a track 2 from magnetic track? because 3 numbers change between EMV and magnetic track....
peace

bro, how to find out which bins are sda and which dds ? so u mean if dump is sda bin u can use it with no problems, cuz track2 and emv data on chip are the same and u don't need to use by writing down any algorithm to decrypte that ?

very simple bro and you gonna see is logic
take a pos terminal in a dda know country = making most card dda mean having dda pos & ATM
put your shimmer inside or your malware
take a dda card and a sda card ok (electron are sda for sure)
next we make a transaction of 1 dollar with 1 card and same with the other card
we repeat it 2 time so what we see = 1 card data change and 1 card data dont change
i mean data use for transaction like arqc, etc
so you see after third transaction that the sda card dont change data because is static
so we talk of a pos in a dda country but if we take the same 2 cards and do it in a pos SDA, the 2 card become static...because of the reader
so we understand that with a shimmer in a big store or atm we can process a lot of card and see it fast, now one method to know it in advance
would be to first found all bin by bank of electron card......
other thing to take in case is that you need to have the last 20 transactions in your dump emv
other thing emv and magnetic track have 3 different number
first you have to read a transaction apdu to understand what happened
i put here a pdf very instructing about how to take the problem, you have to use sim card technologie and to change mean config the band rate.
https://courses.cs.ut.ee/MTAT.07.022...report-f14.pdf
read good that pdf and you gonna learn a lot
depend on card you use and country you use is making changing rules, but is not 100 solution
other thing to take care of is that you have the offline transaction https://txgate.io/images/smilies/smile.gif https://txgate.io/images/smilies/smile.gif https://txgate.io/images/smilies/smile.gif
things are more possible offline, but amount are restricted by bank and stores, etc
http://www.h-online.com/security/new...s-1209382.html
sorry to look like mixed, maybe is make confuse but read the pdf first and you would see
after you make first read during transaction, we can continu
peace

this good share, thanks bro
But do u code any software for it ?

thats why i say to first read data during a transaction
so you would start to see what's happened and what data going on
after we can talk
to do this you not need to program nothing
is all about config already existing tools open source, nothing else
just reading the pdf = just reading it give you answer of it
https://courses.cs.ut.ee/MTAT.07.022...report-f14.pdf
"To achieve this a standard ID
card reader was modified by adding a smart card
contact interface which could be connected to the
wires included in the Simtrace package (Figure 2).
After Simtrace was customized and the software
which sends captured data to the computer was
installed and configured, the sniffing of real world
transaction could begin."
"he transaction analyzed in this report was captured
using a terminal from a friendly merchant in Tartu
and using a Visa Electron debit card issued by SEB
Estonia. The amount of transaction was 0.99 EUR.
The transaction was performed in September, 2014.
The full output (all requests and responses) with
annotation can be found from the appendix.
The final setup for the capture can be seen in
Figure 3.
During the transaction, the computer
connected to the Simtrace board produced a stream
of APDU requests and responses"